Standing-seam metal roofing in Indianapolis
Metal for the whole house, a garage, a porch or an accent roof, installed by our crew to the manufacturer’s exact specifications.
GAF Master Elite®
Factory certified
contractorFree Inspections
Photos of everything
we findLifetime Transferable Warranties
On many of the
products we installFinancing Available
Flexible payment
options
Standing-seam metal roofs for Indianapolis homes, garages and porches
Water coming off a roof looks for any seam or opening it can find, and a shingle roof is made of many small, overlapping pieces. Standing-seam metal is made of long panels that run from the ridge to the eave, joined by raised seams. That gives water far fewer places to get in, which helps keep the decking and the rooms below dry.
Call (866) 242-1832 if you’re weighing metal, whether it’s for a front porch, a detached garage or the whole house. We take on a single bay-window roof as readily as a full re-roof. After a free inspection, we can price metal and shingles side by side for your house.
Dynamic Restoration has been in business since 2008, and every metal job starts with a free inspection and photos we go through with you, often taken by drone. Our Indiana team fits standing-seam panels on houses, garages and porch roofs in Indianapolis, Noblesville, Zionsville and Greenfield.
In winter, a smooth metal roof lets snow slide off rather than build up. That slide can drop snow over a door, a walkway or a gutter, and snow guards can hold it in place where that matters. Hail is the honest trade-off, because large hail can dent metal, and a dent that doesn’t leak still shows. Some homeowner policies don’t cover hail dents on metal that only change its look, so ask your agent before you choose.
Where we install standing-seam metal
- Whole-house metal roofs
- Detached garages and outbuildings
- Front porches, bay windows and covered entries
- Low-pitched sections where shingles struggle
- Metal accents with a new shingle roof
Metal or shingles? The short version
- Metal costs more upfront than shingles
- Snow slides off metal and sits on shingles
- Large hail can dent metal and crack shingles
- Shingles are simpler to patch after damage
- Metal has no granules to lose over time
How your project runs
Before any panel goes on, you’ll know what we found, how metal compares with shingles and when the crew will start, and we stay in touch until it’s done.
Free inspection
Call or book online, and a field representative comes out to inspect your roof and exterior at no cost.
Photos of everything
We document the damage on the roof and around the house, so you see exactly what we found.
Storm claim help
If you file a claim, we meet your adjuster, go over the damage with them and help with the paperwork.
Materials and build
You choose the products and colors. Our crew tears off the old roof and installs the new one to the manufacturer’s specifications.
Final walk-through
We walk the finished job with you and clean up the site. Payment is due on completion, and financing is available.
Indianapolis metal roofing for your home
We fit and fasten every panel to its manufacturer’s specifications, over new underlayment on a deck we’ve checked and repaired where needed.
- Contrast where you want it
Metal can go on just a porch, a bay window or the garage, with shingles on the rest of the house, or over the whole roof.
- Fasteners out of the weather
The fasteners sit hidden under the raised seams instead of going through the face of the panel, so the surface rain runs over stays unbroken.
- Made for low slopes
Standing-seam panels are made for lower slopes, which suits a porch roof that’s too flat for shingles to shed water well.
- No granules to wear off
Metal panels don’t shed granules the way shingles do as they age, which is part of why a standing-seam roof has a long service life.
Metal roofing across Central Indiana
Our Indiana team works across Indianapolis and the towns around it. Each town has its own page.
Is a metal roof loud when it rains?
Not the way most people expect. The drumming you hear in a barn comes from metal on open framing with no insulation. A home’s metal roof goes over solid decking and underlayment, with an insulated attic beneath it. The Metal Roofing Alliance says a well-built metal roof doesn’t transmit any more sound than an asphalt roof, and that noise depends on the decking, insulation and installation.
Can you install a metal roof over my old shingles?
We don’t. The old roof comes off first, the same as with a shingle replacement, so we can check the decking and replace anything soft or rotted. The metal then goes over a sound, dry deck with new underlayment, installed to the panel manufacturer’s specifications. It’s more work on the first day, and it’s the right base for a roof meant to last.
How much more does a metal roof cost?
The price turns on the panel, the color, the size of the roof and how many valleys, dormers and openings it has, so we won’t guess at a number before we’ve seen it. After the free inspection we can price standing-seam metal and shingles for the same house, and you can weigh the cost against what each gives you. Financing is available.
Book your free roof inspection.
Tell us a little about your home. We’ll call to set a time, inspect the roof and exterior, and go through the photos with you before recommending any work.
- Photos of everything we find
- Payment on completion
- Serving Indianapolis and Central Indiana
Thanks. Your request is in.
We'll call to schedule your free inspection. Need us sooner? Call (866) 242-1832.